cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
Register for the monthly ISE Webinars to learn about ISE configuration and deployment.
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

254
Views
5
Helpful
2
Replies
Highlighted
Cisco Employee

ise tacacs transations per second report

Hi,

Is there a way to get a report on TACACS+ transactions per second? A customer would like to see if he exceeds the performance metric or a standalone RADIUS/T+ to decide if he should change his design

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ise tacacs transations per second report

If you customer is running ISE 2.2, the they can pull the TPS from the ISE diagnostic report, however the TPS is not specific to TACACS+

Screen Shot 2017-07-20 at 3.07.00 PM.png

In earlier ISE build, the TPS data can be got via CLI

Screen Shot 2017-07-20 at 3.14.56 PM.png

Copying chyps to keep me honest here.

Cheers!

-Hari

2 REPLIES 2
Cisco Employee

Re: ise tacacs transations per second report

If you customer is running ISE 2.2, the they can pull the TPS from the ISE diagnostic report, however the TPS is not specific to TACACS+

Screen Shot 2017-07-20 at 3.07.00 PM.png

In earlier ISE build, the TPS data can be got via CLI

Screen Shot 2017-07-20 at 3.14.56 PM.png

Copying chyps to keep me honest here.

Cheers!

-Hari

Cisco Employee

Re: ise tacacs transations per second report

Hi Hari,

 

The TPS is mentioned in Avg. Can we know the duration of it ?

 

Regards,

Hiten R