07-19-2017 12:57 PM
Hi,
Is there a way to get a report on TACACS+ transactions per second? A customer would like to see if he exceeds the performance metric or a standalone RADIUS/T+ to decide if he should change his design
Thanks
Solved! Go to Solution.
07-20-2017 03:15 PM
If you customer is running ISE 2.2, the they can pull the TPS from the ISE diagnostic report, however the TPS is not specific to TACACS+
In earlier ISE build, the TPS data can be got via CLI
Copying chyps to keep me honest here.
Cheers!
-Hari
07-20-2017 03:15 PM
If you customer is running ISE 2.2, the they can pull the TPS from the ISE diagnostic report, however the TPS is not specific to TACACS+
In earlier ISE build, the TPS data can be got via CLI
Copying chyps to keep me honest here.
Cheers!
-Hari
02-14-2019 01:39 AM
Hi Hari,
The TPS is mentioned in Avg. Can we know the duration of it ?
Regards,
Hiten R
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide