cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
Register for the monthly ISE Webinars to learn about ISE configuration and deployment.
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

379
Views
2
Helpful
2
Replies
Beginner

Issue selecting disk space using ISE-2.0.1.130-virtual-SNS3415.ova

Hello,

I am building a new ISE VM using the following OVA template: ISE-2.0.1.130-virtual-SNS3415.ova. However when I start setting up the new VM the allocated hard drive size is a fixed 200GB from a template and it can not be changed. Looks like 200 GB is the drive size built into the OVA template.

Anyone knows of a way around this as I would need minimum of 600 GB disk space. I guess another option would be building it using the ISO instead of the OVA template.

Thanks.

Everyone's tags (4)
2 REPLIES 2
Cisco Employee

Re: Issue selecting disk space using ISE-2.0.1.130-virtual-SNS3415.ova

You are correct that the OVA file fixes the file size to 200 GB. If this is for production, please go ahead and perform ISO re-install. Disk resizing is not supported after ISE installed.

Highlighted
Beginner

Re: Issue selecting disk space using ISE-2.0.1.130-virtual-SNS3415.ova

Thanks for the reply, will take the ISO route.