cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
539
Views
0
Helpful
4
Replies

Latency in an ACS environment for replication

umahar
Cisco Employee
Cisco Employee

 

Already asked this question related to ACS here. 

https://community.cisco.com/t5/policy-and-access/latency-in-an-acs-environment-for-replication/m-p/3787392

 

What is the maximum acceptable latency between various ACS nodes for replication traffic ?

Eg. For ISE it is 300 ms

1 Accepted Solution

Accepted Solutions

ldanny
Cisco Employee
Cisco Employee

Your right it doesn't seem to be documented but speaking with some of our ACS vintage gurus :) they say from experience it would be less then 200ms

Absolute maximum is 250ms

 

hope that helps.

View solution in original post

4 Replies 4

umahar
Cisco Employee
Cisco Employee

Hi,

 

What is the maximum acceptable latency between various ACS nodes for replication traffic ?

I scoured documents and deployment guides because I saw your other post, I can't find it documented publicly. If it's like older versions of ISE, then it's less than 200 ms.

From past customer deployments that I have migrated off of, there were some nodes with 250 ms rtt to the primary. No issues in either of those two fringe cases, relatively large 5k+ NAD deployments too.

Maybe someone in the BU knows and can fill us in.

Thanks Damien for taking a look at it. 

I also couldn't find any document related to this.

 

ldanny
Cisco Employee
Cisco Employee

Your right it doesn't seem to be documented but speaking with some of our ACS vintage gurus :) they say from experience it would be less then 200ms

Absolute maximum is 250ms

 

hope that helps.