Port 8905 and-or 8909

[Aaron Woland]

Question from a customer, that came into my email:

[There is a] Contradiction in ISE 2.2 Admin Guide vs Installation guide about port used for Supplicant Provisioning:

8905 = ISE 2.2 Installation Guide  “Cisco ISE presents the Admin certificate for Posture and Client Provisioning on TCP port 8905.”

8909 = ISE 2.2 Administrator Guide “Open up TCP port 8909 and UDP port 8909 to enable installation of Cisco NAC Agent, Cisco NAC Web Agent, and supplicant provisioning wizard”

[hslai · Accepted solution]

IIRC ISE has not been using TCP/UDP 8909 since ISE 1.2 or so.

CSCvi08985 doc bug opened for this.

BTW... customers may use the Feedback link to send in questions or comments on any of Cisco docs at CCO.