cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
Register for the monthly ISE Webinars to learn about ISE configuration and deployment.
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

107
Views
0
Helpful
1
Replies
Highlighted
Cisco Employee

Problem with Data Access Permission for Endpoints

Looking for help with a Data Access Permission issue.

 

The admin should only be able to add or delete an endpoint to a pre-defined endpoint identity group. 

  • Good - When the admin logs into ISE, they only see the endpoints from the specified endpoint group. 
  • Problem - When the admin creates a new endpoint and tries to assign the static identity group, there aren't any groups to pick from.

 

Screen Shot 2019-05-21 at 5.46.01 PM.png

 

Screen Shot 2019-05-21 at 5.51.02 PM.png

Screen Shot 2019-05-21 at 5.48.23 PM.pngScreen Shot 2019-05-21 at 5.48.06 PM.png

1 REPLY 1

Re: Problem with Data Access Permission for Endpoints

Hi @Jonathan Grim 

 

Please check this thread Community Thread about Identity Management Access

 

HTH

Regards,
Sathiyanarayanan Ravindran

Please rate the post and accept as solution, if my response satisfied your question:)