05-29-2019 02:00 AM
Hello dear community,
We have a question about Cisco ISE Clustering. Currently, we have two Cisco ISEs with 2.1 Patch 6 version installed on same CPD.
Regarding an infraestructure change, we will have to install Cisco ISE on other CPD on other location. We would like to know if this is possible and also, want to know what could be the recomendations for this environment.
Regards,
Aitor
Solved! Go to Solution.
05-29-2019 08:09 AM - edited 05-29-2019 08:11 AM
Not sure what a CPD is or what your topology looks like but likely you have 2 standalone systems running PAN/PSN/MNT on each of them. Depends on why you're moving. You can build another setup in parallel and add it as a secondary in the deployment (after shutting down current secondary system).
I would recommend looking at Cisco Live BRKSEC-3432 under performance and scale learning link
https://community.cisco.com/t5/security-documents/ise-performance-amp-scale/ta-p/3642148
You should also look to moving to a supported long term release. 2.2 or even 2.4
05-29-2019 08:09 AM - edited 05-29-2019 08:11 AM
Not sure what a CPD is or what your topology looks like but likely you have 2 standalone systems running PAN/PSN/MNT on each of them. Depends on why you're moving. You can build another setup in parallel and add it as a secondary in the deployment (after shutting down current secondary system).
I would recommend looking at Cisco Live BRKSEC-3432 under performance and scale learning link
https://community.cisco.com/t5/security-documents/ise-performance-amp-scale/ta-p/3642148
You should also look to moving to a supported long term release. 2.2 or even 2.4
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: