cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
ISE 2.3 Patch 7 has been posted. This will be the last patch for the ISE 2.3 release!
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

881
Views
0
Helpful
7
Replies
Highlighted
Cisco Employee

RADIUS Accounting logs for command level accounting on Juniper devices

Hi

Is it possible to see command level accounting logs via RADIUS on ISE for Juniper routers?

http://www.juniper.net/documentation/en_US/junos13.2/topics/task/configuration/radius-accounting-configuring.html

I know that Cisco supports command accounting only via TACACS.

Regards

Anand

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: RADIUS Accounting logs for command level accounting on Juniper devices

Hi Anand,

My comments were based on some searches I did for Juniper and ISE integration which points out the need for the dictionaries to be added.  IMO it is worth a try.

Use Cisco ISE for RADIUS Authentication with Juniper Junos Devices — REDELIJKHEID

How-To: Configure Juniper EX Series switches and C... - J-Net Community

7 REPLIES 7
Cisco Employee

Re: RADIUS Accounting logs for command level accounting on Juniper devices

Upload of the Juniper dictionary if not already there would be required also.

Cisco Employee

Re: RADIUS Accounting logs for command level accounting on Juniper devices

From the developer, We should log RADIUs accounting messages, whether they are for Network Access or Command Accounting, but they won’t get special handling like TACACS+ command accounting will.

Cisco Employee

Re: RADIUS Accounting logs for command level accounting on Juniper devices

Thanks Jason

I thought so that we get the messages. The customer says he is not able to see the messages. Can you pls check with the developer what is the right place to see those messages. Also someone told about the dictionary part; can you pls elaborate what is that?

Cisco Employee

Re: RADIUS Accounting logs for command level accounting on Juniper devices

i dont think updating the dictionaries will help in receiving accounting messages but will allow paul to elloborate

FYI, RADIUS accounting log is:

Operations/Reports/ISE Reports/Endpoints and Users/RADIUS Accounting

Cisco Employee

Re: RADIUS Accounting logs for command level accounting on Juniper devices

Hi Jason, can you pls buzz Paul to respond? Thanks!

Cisco Employee

Re: RADIUS Accounting logs for command level accounting on Juniper devices

Hi Anand,

My comments were based on some searches I did for Juniper and ISE integration which points out the need for the dictionaries to be added.  IMO it is worth a try.

Use Cisco ISE for RADIUS Authentication with Juniper Junos Devices — REDELIJKHEID

How-To: Configure Juniper EX Series switches and C... - J-Net Community

Cisco Employee

Re: RADIUS Accounting logs for command level accounting on Juniper devices

Thanks Paul. Will try it out.