cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

128
Views
0
Helpful
1
Replies

Restoring ISE 2.2 Backup to ISE 2.6

Hi,

Is it possible to restore a backup from a version 2.2 ISE to a Version 2.6? Or would I neet to upgrade the 2.2 VM/Appliance?

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Advocate

Re: Restoring ISE 2.2 Backup to ISE 2.6

Yes you will be able to take a 2.2 backup straight in to a 2.6 node, 2.6 will accept a backup from 2.1 or newer.

At the same time, if you have not already run the URT while on 2.2, it's possible that differences in the data structure could cause the restore to fail. The data in the backup goes through the same upgrade that it would if you were to upgrade a 2.2 node to 2.6.

View solution in original post

1 REPLY 1
Highlighted
VIP Advocate

Re: Restoring ISE 2.2 Backup to ISE 2.6

Yes you will be able to take a 2.2 backup straight in to a 2.6 node, 2.6 will accept a backup from 2.1 or newer.

At the same time, if you have not already run the URT while on 2.2, it's possible that differences in the data structure could cause the restore to fail. The data in the backup goes through the same upgrade that it would if you were to upgrade a 2.2 node to 2.6.

View solution in original post