cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

2831
Views
8
Helpful
1
Replies
Cisco Employee

Solution for Change of VLAN for wired Guests using Smart Port Macros

 

Several customers have been asking us to implement Change of VLAN for wired guests. Till date we have discouraged customers from implementing this capability from ISE as it is difficult/impossible to implement by sending a VLAN in Radius Authorization due to the issues with renewing IP Address for MAB authentication.

 

We have developed a solution based on Smart Port Macros and have tested this in our lab.  The attached ppt provides details of the this solution and associated configuration in ISE and switch.

The solution was validated in our lab running ISE 2.1 patch 2 and 3650 running 3.7.5

 

 

 

 

 

Everyone's tags (5)
1 REPLY 1
Highlighted
Beginner

Re: Solution for Change of VLAN for wired Guests using Smart Port Macros

Is there a good way to disable the built-in triggers/macros because when I enable SmartPorts it breaks my working config since it overrides my access and voice vlans among other settings. I'm currently running ISE 2.2.0.470 patched through #8 on a 3850 running on 16.3.5b