cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
ISE 2.3 Patch 7 has been posted. This will be the last patch for the ISE 2.3 release!
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

487
Views
0
Helpful
3
Replies
Highlighted
Beginner

Trying to authenticate...

via UPN instead of SAMaccountname.

The issue is we recently federated with O365 and had to change our UPN from matching our SAMaccountname to our email address.

example.   SAM = MD2133  UPN = mdavis@example.com

When i log into my computer with my UPN, NAM pops up and wants my creds.  it will only take my creds if i user my SAM.

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Trying to authenticate...

Michael,

Please see the information to setup NAM profile to use the right type of credential using the administration guide.

http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect42/administration/guide/b_AnyConnect_Administrator_Guide_4-2/configure_nam.html

That said, ISE does'nt officially support Office 365. As I mentioned I do not know how O365 is integrated with AD.

But you can try that guide above to setup the Anyconnect NAM profile in the right way using NAM profile editor and use that.

Thanks

Krishnan

3 REPLIES 3
Cisco Employee

Re: Trying to authenticate...

Hi Michael,

Need more information on what ISE software version you are using.

Not sure what kind of integration you have with Office 365.

Please make sure to check ISE compatibility guide on integration with Office 365.

Cisco Identity Services Engine - Compatibility Information - Cisco

Thanks

Krishnan

Beginner

Re: Trying to authenticate...

We are running ISE 2.1.0.474 / AnyConnect 4.2.05015

Cisco Employee

Re: Trying to authenticate...

Michael,

Please see the information to setup NAM profile to use the right type of credential using the administration guide.

http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect42/administration/guide/b_AnyConnect_Administrator_Guide_4-2/configure_nam.html

That said, ISE does'nt officially support Office 365. As I mentioned I do not know how O365 is integrated with AD.

But you can try that guide above to setup the Anyconnect NAM profile in the right way using NAM profile editor and use that.

Thanks

Krishnan