cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

238
Views
0
Helpful
3
Replies
Highlighted
Beginner

User Login issue on Cisco ISE version 2.1.0.474

User logs in to wireless network with correct(verified) AD credentails ISE throws "invalid password"
Checking through ISE guest logs I notice following error logged.

2018-09-18 08:34:41,331 ERROR [http-bio-172.16.113.45-8443-exec-4331][] guestaccess.flowmanager.step.guest.CredentialStepExecutor -:ex-tieto-tvanderhaar:- User (ex-tieto-tvanderhaar) login failed
2018-09-18 08:34:41,331 ERROR [http-bio-172.16.113.45-8443-exec-4331][] cpm.guestaccess.auth.authentication.NAAuthResultProcessor -:ex-tieto-tvanderhaar:- Can not find the authStoreGUID in the authenticated authentication Result!!

AD diagnostics done on ISE no problems found!

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: User Login issue on Cisco ISE version 2.1.0.474

This should work with the defaults as well. Can you log into the guest portal using an internal user or even a guest? Is your portal setup to use that store for the auth method (under guest portal settings). otherwise please engage the TAC to look at your system

View solution in original post

3 REPLIES 3
Cisco Employee

Re: User Login issue on Cisco ISE version 2.1.0.474

What version of ISE? Are you using the guest (CWA) portal?

Do you have AD allowed in your guest identity store ?
Beginner

Re: User Login issue on Cisco ISE version 2.1.0.474

What version of ISE? --- Cisco ISE version 2.1.0.474

Are you using the guest (CWA) portal? --- Yes

Do you have AD allowed in your guest identity store ? --- Yes

Cisco Employee

Re: User Login issue on Cisco ISE version 2.1.0.474

This should work with the defaults as well. Can you log into the guest portal using an internal user or even a guest? Is your portal setup to use that store for the auth method (under guest portal settings). otherwise please engage the TAC to look at your system

View solution in original post