cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
 
ISE 2.3 Patch 7 has been posted. This will be the last patch for the ISE 2.3 release!
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

247
Views
0
Helpful
6
Replies
Beginner

Want to install ISE on 3515

Hi, 

We have purchased a Cisco SNS 3515 for ISE, I want to install ISE and configure that.

 

Do I need to install an image on this server?

What is the recommended software version for that?

Any documentation for doing that? 

 

Looking forward for your reply guys.. Thanks!!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Want to install ISE on 3515

Hopefully you've already looked at the Identity Services Engine (ISE) Community Resources and saw the convenient links to the ISE Installation and other guides:

2.4 RN Compatibility Admin Install - CLI -
2.3 RN Compatibility Admin Install API CLI -

 

Please follow the instructions in the Installation Guide for your appliance.

 

Also read Getting Started with ISE which includes a link to a YouTube video for doing the initial ISE configuration.

6 REPLIES 6
VIP Engager

Re: Want to install ISE on 3515

Connect to the CIMC, mount the .iso for the ISE version you want to run and install ISE.  I would probably go right to 2.4, but not sure what you are trying to do.

Hall of Fame Master

Re: Want to install ISE on 3515

The SNS-3515 should have an ISE image pre-installed if it was ordered properly. If it was delivered recently it would most likely have ISE 2.3. 

 

If that's the case, bootstrap it per the ISE installation Guide and then upgrade it to 2.4 plus Patch 2 (currently).

 

If it's not the case then mount the ISE 2.4 IOS file as @paul suggested and install it.

Cisco Employee

Re: Want to install ISE on 3515

Hopefully you've already looked at the Identity Services Engine (ISE) Community Resources and saw the convenient links to the ISE Installation and other guides:

2.4 RN Compatibility Admin Install - CLI -
2.3 RN Compatibility Admin Install API CLI -

 

Please follow the instructions in the Installation Guide for your appliance.

 

Also read Getting Started with ISE which includes a link to a YouTube video for doing the initial ISE configuration.

Beginner

Re: Want to install ISE on 3515

Thank you all for your reply. It's been installed. Is there any way to save the config  after making the changes to the ISE. 

Cisco Employee

Re: Want to install ISE on 3515

It seems you are asking about backups, so see Back Up Cisco ISE Configuration and Operational Data from the Primary Administration Node. If you have only a standalone ISE node, then just treat it as if a primary admin node.

Highlighted
Beginner

Re: Want to install ISE on 3515

I did it many times with older version for 1.4 OS. I downloaded the image from Cisco site. Burn it on DVD and just installed it. 

You can do upgrade directly from the ISE box using CLI or GUI.