cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

151
Views
0
Helpful
3
Replies
Participant

Where to configure dictionary for advanced attributes in authorization profiles?

For the life of me I cant seem to find where these dictionaries are configured. I am migrating an ISE 1.3 config to ISE 2.3, I cant find where these would be configured in either gui.

Can someone point me in the right direction. Where are these dictionaries configured. I went to dictionaries tab and these ones are not there, example Cisco-VPN3000, APC (looks like custom), Cisco-BBSM, etc.

 

Screen Shot 2020-01-24 at 5.18.23 am.jpg

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Rising star

Re: Where to configure dictionary for advanced attributes in authorization profiles?

Go to Policy->Policy Elements->Dictionaries.  Then you will see System and User as the top-level folders.  Anything that comes with ISE by default is in System and any custom dictionaries will fall under User.  Expand the System folder, then expand the Radius folder.  Under there, you will see Radius Vendors.  That is where you will find Cisco-VPN3000 and Cisco-BBSM.  APC is not listed in my ISE instance so you can find it under your User folder if someone added it to your system.

View solution in original post

3 REPLIES 3
Highlighted
RJI Advisor
Advisor

Re: Where to configure dictionary for advanced attributes in authorization profiles?

Hi,

They are hidden under Dictionaries > RADIUS Vendors.

 

Capture.PNG

 

HTH

Highlighted
Rising star

Re: Where to configure dictionary for advanced attributes in authorization profiles?

Go to Policy->Policy Elements->Dictionaries.  Then you will see System and User as the top-level folders.  Anything that comes with ISE by default is in System and any custom dictionaries will fall under User.  Expand the System folder, then expand the Radius folder.  Under there, you will see Radius Vendors.  That is where you will find Cisco-VPN3000 and Cisco-BBSM.  APC is not listed in my ISE instance so you can find it under your User folder if someone added it to your system.

View solution in original post

Highlighted
Participant

Re: Where to configure dictionary for advanced attributes in authorization profiles?

Hi RJI / Colby,

Thanks for your prompt responses. Yes, it was under the system > Radius folder. And I was able to create a custom radius vendor in this folder.