WS-C3650 version incompatible?

[getaway51]

Hi,

switch model is WS-C3650-24PS-S

I got the error messages (MAB not supported, dot1x not supported in this interface) when i tried "source template dot1x"

sh version
Cisco IOS Software [Denali], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.3.5b, RELEASE SOFTWARE (fc1)

version incompatible?

[Colby LeMaire]

The most recent compatibility matrix is located here:

https://www.cisco.com/c/en/us/td/docs/security/ise/2-6/compatibility/b_ise_sdt_26.html#supportedciscoaccessswitches

[Jason Kunst]

---

@Colby LeMaire wrote:

The most recent compatibility matrix is located here:

https://www.cisco.com/c/en/us/td/docs/security/ise/2-6/compatibility/b_ise_sdt_26.html#supportedciscoaccessswitches

---

Also look at Does ISE support my NAD? it's up to the switch and licensing level to support the features to work with dot1x/mab/coa/url-redirect , not about ISE working with the switch

[andrewswanson]

Hi

How is the interface configured? Is it a static access port or a trunk? see thread below for 802.1x supported interface types:

https://community.cisco.com/t5/policy-and-access/dot1x-on-trunk-port/td-p/2458101

hth

Andy