Industrial Networking

Hi, I collect vintage Cisco networking equipment. I have a Cisco PIX 515E.I can't seem to reach the outside internet with it. Here is my config: RDXLFW1# sh ru: Saved:PIX Version 7.2(2)!hostname RDXLFW1enable password 8Ry2YjIyt7RRXU24 encryptednames!...

HelloTried to configure networking for custom Docker container according to https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2020/pdf/BRKARC-1002.pdf and notes from https://developer.cisco.com/docs/iox/#!isr-4000asr-1000-series-application-devel...

Hello! I'm currently working on lab 6.3.2.3 Packet Tracer - Prototype & Test the Solution. The basic logic is to monitor the current status of garage doors. I wanted to add to Home Wireless Router, expect laptop and pc connected to it, one more pc by...

hello, i have a problem trying to push a configuration with  my router but and send me back this message Unable to configure element: This template is for IR829 and does not support IR809G-LTE-NA-K9 ---- FTL stack trace ("~" means nesting-related): -...

Hi, We are looking to implement the MRP protocol on our Network. We are using IE3300 and IE4010 Cisco switch model. I found that the IE3300, we don't need to buy a License to use this MRP Protocol with a firmware version 17.7.1. I want to make sure i...

as the title said, i am trying to get the cisco IOs IR800 to boots in rommon2 with SCP , FTP but with no success, so if someone can send me the IOS i would be happy.

hello. I am tryng to config my cisco router in Cisco Iot Operations Dashboard, but everytime that i try,  the status message appears "Devices is nOt up" with the event type config push error .  From my cisco router i can ping 8.8.8.8 and do telnet us...

Step 10If you have web connectivity, the device will try to connect. It is recommended that you close the browser session and move to the newly configured WebUI ip address.Hello,I have two problems with Day0 configuration of IR1101-K9 with 17.9.1 fir...

How to setup IOT on combined environment? Say we have ION as uplink and Meraki switches ! How to setup the IOT vlan in MR and MS? Modify templates?

Hi there, This is the first time I am participating in any community discussions. Pardon me, if I have missed any formalities. I am using IR809G router which is running on IOS 15.9(3)M1 with the I have created an EEM TCL script to be triggered on a s...

Dear CISCO Team, Good Afternoon. We are communicating W5500 ETHERNET IC through CISCO Ethernet Switch 2960X-24PS-L  in our IOT device for data transmission. But, Ethernet is not working with different Switch Configuration at all the time. The observa...

I’m attempting to put our IOT Amazon Thermostats on a VLAN with a restricted ACL. It allows access to Internet, DNS, and DHCP. Deny access to all other Vlans and devices. The ACL I have works on test PC’s place on the Vlan. But when connecting the th...