Hi, I have an issue with IE-4000 relay alarm (maybe same thing with with IE-3200). We are using NC = Normally closed in all other manufacturer ethernet swithces and we need to do the same with Cisco IE-4000/5000/3200 swithces. We have connected cable...
Forum Posts
How to setup IOT on combined environment? Say we have ION as uplink and Meraki switches ! How to setup the IOT vlan in MR and MS? Modify templates?
Hi, Below are queries raised by our client for the DNA-Spaces and I'm unable to find details for some of them, End to End connectivity of this solution.Need following details in each connections:APP/Port:Authentication:Encryption:Data Direction:IP Re...
Resolved! IE vs Catalyst IOS Versions
Having discussions with a vendor about IE vs Catalyst IOS versions. I thought that IE switches had their own flavor of IOS?Anybody know because there are a lot of CVEs that go back 10+ years and the IE switches where not around?
Helloin the cisco packet tracer I was trying to check the IoT devices that is linked to the server via the tablet. When I open the web server in the tablet I use to enter the IP Address of the Server(1) and once I want to sign up and chose a username...
What products can I use to set up a simple home network for practice purposes.Background info: I have some knowledge and mostly hands on training. I’m looking to build my fundamental knowledge. The system I work on at work has been set up and it has ...
Hi all,I am wondering which of the Cisco Switches are supporting TSN or are at least HW-ready for TSN.Looking into the current portfolio, obviously only IE 4000 currently supports TSN.As far as I remember from some Cisco Live events in the past they ...
ALGO 8188 ceiling speaker is registered to CUCM 12.5. The ring feature is working fine, but the paging feature is not working. When I call the page number, it is busy and drop. Checked the syslog, I can see the call make to paging number but there is...
Hi there, This is the first time I am participating in any community discussions. Pardon me, if I have missed any formalities. I am using IR809G router which is running on IOS 15.9(3)M1 with the I have created an EEM TCL script to be triggered on a s...
Hello,Do we have to connect the two DC inputs of a Cisco IE2000 to the same power supply? In spite of the fact that DC-A and DC-B inputs are not fully redundant, both are connected to separate internal power supplies. Because of this, I believe DC-A ...
Resolved! IE-5000 Netconf configuration
I am attempting to get netconf working between an IE-5000 and DNA Center. After enabling netconf-yang, the switch will not open port 830 to allow netconf communication. I have read and followed numerous guides Cisco has provided, but none have led ...
Resolved! CURWB Mobility Design
Hi All, Regarding Cisco Ultra Reliable Wireless Backhaul topology , I have a query on configurations as well as connectivity mode. Consider a scenario , a moving vehicle has 3 FM 4500 Mobi radios, connecting to way side radio(FM 4500Mobi radios...
Dear CISCO Team, Good Afternoon. We are communicating W5500 ETHERNET IC through CISCO Ethernet Switch 2960X-24PS-L in our IOT device for data transmission. But, Ethernet is not working with different Switch Configuration at all the time. The observa...
Hello there,Should the two DC inputs of a Cisco IE2000 be connected to the same power supply? In spite of the fact that this is not fully redundant, a previous employee replied (copied below) that DC-A and DC-B feed two different internal power suppl...
HelloI'm doing some HW configuration on TIA V17 with 1 CISCO IE200-OTC-G connected an IFM ASI Master Module. Everything works more or less ok. But when I try to make the topology on TIA, the CISCO never become green, the port looks doesn't recognize ...
