Hey, Got a couple of questions: 1. I would like to know which devices can FMC manage. I've tried to understand it from the Data Sheets but it is still not clear for me. can FMC manage ASA-based devices? Can FMC manage ISA 3000 with ASA? 2. What is t...
Forum Posts
I’m attempting to put our IOT Amazon Thermostats on a VLAN with a restricted ACL. It allows access to Internet, DNS, and DHCP. Deny access to all other Vlans and devices. The ACL I have works on test PC’s place on the Vlan. But when connecting the th...
What is the supported throughput for the router IR1101-A-K9?
Hello,I created a local SPAN session with timestamping on an IE-5000 switch. 18-bytes long trailers are added to captured frames but what is the format of these trailers?Any hint would be nice.
Hi, Is it necessary to connect the two DC inputs of a Cisco IE2000 to the same power supply? The DC-A and DC-B inputs are both connected to separate internal power supplies, regardless of the fact that this is not fully redundant. Due to this, I beli...
Hi FriendsHow can i talk to Industrial switch IE-3300 over Allen Bradley Control Logix PLC, i need to get port status as well Ring network status by Message instruction Thanks in advance
Dear All,I'm not able to find out if the CISCO LoRaWAN Gateway (Model IXM-LPWA-800-16-K9) have the possibility to enable the RADIUS access. So I can use ISE to handle accounting for it.
my IOS version is "ir800 Software (ir800-UNIVERSALK9-M), Version 15.9(3)M6a"i installed iox image "ir800-ioxvm.img.1.9.0.7.gz",the lever 15 user from IOS,cannot access guest OS,password is wrong.i have run "username cisco privilege 15 password 0 cisc...
Does the Catalyst IE-3200-8T2S-E support NAT. I was told this device supports NAT pre-sale and it appears it does not after configuration. If it does not support NAT is there a firmware upgrade to add this feature?
Hello,I am trying to use TSN feature on Cisco IE 4000 switch. According to TSN documentation for IE 4000, I need to use a CNC software which is provided by Cisco in order to create TSN schedules. However, I can't find any information about installin...
我分公司的CV注册到总部的CV时，报如下错误。这时候，我的 TCP 端口双向释放，我尝试重启两个 CV。这个问题在我的实验环境中没有出现，在环境中实现分公司CV注册的时候，不管你的总部指纹和IP为什么乱码，都不会出现这个错误。请问这个错误是怎么解决的。
Hi I am stuck to push the configuration in cloud. I am getting error as below. Could you please help me find out solution ?*Sep 22 16:51:00.233: %SYS-6-BOOTTIME: Time taken to reboot after reload = 238 seconds*Sep 22 16:51:02.146: %SYS-5-CONFIG_P: ...
I have a new role in an IoT company that works with lighting sensors. The sensors join the network thru a CGR in the field using a CG-Mesh network. The company wants to upgrade from CGmesh to the new standard WiSun; the sensor's firmware and the WPAN...
Resolved! IE5000 Can't start PTP
Hi,Have a IE5000 configured with GNSS. Original plan was to use the switch as NTP master. Then found out that it does not support NTP with GNSS - only PTP. My problem now is that I can't find a command to start and configure PTP?Have configured PTP o...
Hi Team, What will be the Ring size ( total no of switches ) supported by Cisco IE switches ( Industrial grade). Thanks, Akshatha
