Industrial Networking

Hi, I collect vintage Cisco networking equipment. I have a Cisco PIX 515E.I can't seem to reach the outside internet with it. Here is my config: RDXLFW1# sh ru: Saved:PIX Version 7.2(2)!hostname RDXLFW1enable password 8Ry2YjIyt7RRXU24 encryptednames!...

HelloTried to configure networking for custom Docker container according to https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2020/pdf/BRKARC-1002.pdf and notes from https://developer.cisco.com/docs/iox/#!isr-4000asr-1000-series-application-devel...

Hello! I'm currently working on lab 6.3.2.3 Packet Tracer - Prototype & Test the Solution. The basic logic is to monitor the current status of garage doors. I wanted to add to Home Wireless Router, expect laptop and pc connected to it, one more pc by...

Hi  one of our customers has IE3300-8P2S-E switches in their environmnet, recently they are in need of few more switches. i was not able to add the same in BoQ. i was suggested to "IE-3400-8P2S-E++" as a replacement available with no specific reason ...

Hello,I'm trying to deploy a P-LPWA-900 LoRaWAN gateway module on an IR1011.  To connect it to AWS, two certs need to be installed.On an IXM, there is a cert install command to be able to do this.  Is there an equivalent command to be able to do this...

IE4000 (or Stratix 5400) user question:  Has anyone successfully made VTP version 3 (or v2) work over a PRP interface?   Debug sw-vlan * seems to show the VTP library transmitting VTP on the PR1 meta-interface instead of the underlying physical inter...

I nee to convert the following code from ios to ios xe:!ptp mode boundarymls qos map policed-dscp 24 27 31 43 46 47 55 59 to 0mls qos map dscp-cos 9 11 12 13 14 15 to 0mls qos map dscp-cos 25 26 28 29 30 to 2mls qos map dscp-cos 40 41 42 44 45 49 50 ...

Hi everyone,I would like to learn how to use Cisco Jasper now called IoT Control Center but I can't find any resources.Do you recommend files or courses that I can follow?Thank you

I have an IR1101 with Verizon SIM. I have less experience with Cisco cellular, and all experience using Digi, Cradlepoint, and Sierra. With the Digis we use a heartbeat process that pings 1 of 2 IPs, and when both fail it will restart the interface, ...

Hi all. We have had about 37 Cisco IXM-LPWA-800-16-K9 operational for some 2 years now. They have been installed at different locations and powered by Cisco PoE switches. We are running LRR with Actility software. Intermittently, any LoraWAN GW may l...

hello, i have a problem trying to push a configuration with  my router but and send me back this message Unable to configure element: This template is for IR829 and does not support IR809G-LTE-NA-K9 ---- FTL stack trace ("~" means nesting-related): -...

Hi guys:I have a problem. Do you know how the IE5000 equipment implements the Dual-Active Detection in Horizontal Stacking?I have two IE-5000-12S12P-10G in horizontal stack mode. Thanks