cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1092
Views
2
Helpful
4
Replies

IE3200 boot troubles

Minnesotakid
Level 1
Level 1

I seem to be running into issues with the configuration register working properly on the IE-3200-8P2S switches. I often use a USB stick to transfer images to the switch for staging, but if I leave the USB stick connected during boot, the switch will override my configuration register and boot to the image it finds on the USB stick as well as any startup-config's that are present (it will ignore my startup config on local flash as well in these cases). 

I am booting using packages.conf and configuration register set to 0x2102.

I wasn't able to find any specifics regarding USB being prioritized on this model no matter what. Has anyone else experienced this?

Below is the show ver and show boot.
============================

Switch#show boot
Current Boot Variables:
BOOT variable = flash:/packages.conf;

Boot Variables on next reload:
BOOT variable = flash:/packages.conf;
Config file = flash:/nvram_config
ENABLE_FLASH_PRIMARY_BOOT = no
MANUAL_BOOT variable = no
ENABLE_BREAK variable = yes
========================

Switch#show ver
Cisco IOS XE Software, Version 17.09.04a
Cisco IOS Software [Cupertino], IE3x00 Switch Software (IE3x00-UNIVERSALK9-M), Version 17.9.4a, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2023 by Cisco Systems, Inc.
Compiled Fri 20-Oct-23 10:25 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2023 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON
BOOTLDR: Version 7.1.14 [RELEASE SOFTWARE] crashkernel=64M
USMNWIN3-NSW15 uptime is 16 minutes
Uptime for this control processor is 17 minutes
System returned to ROM by Reload Command at 10:33:05 CST Thu Nov 30 2023
System image file is "flash:/packages.conf"
Last reload reason: Reload Command

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


Technology Package License Information:

------------------------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------------
network-essentials Smart License network-essentials
None Subscription Smart License None


Smart Licensing Status: Smart Licensing Using Policy

cisco IE-3200-8P2S (ARM) processor (revision V06) with 431117K/6147K bytes of memory.
Processor board ID XXX
1 Virtual Ethernet interface
10 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
1968364K bytes of physical memory.
523264K bytes of crashinfo at crashinfo:.
1684480K bytes of Flash at flash:.

Base Ethernet MAC Address : XXX
Motherboard Assembly Number : 73-101446-11
Motherboard Serial Number : XXX
Model Revision Number : V06
Motherboard Revision Number : B
Model Number : IE-3200-8P2S
System Serial Number : XXX
Top Assembly Part Number : 68-101575-06
Top Assembly Revision Number : D0
System FPGA version : 0.89.2
CIP Serial Number : XXX
SKU Brand Name : Cisco

Configuration register is 0x2102

2 Accepted Solutions

Accepted Solutions

cakwok
Cisco Employee
Cisco Employee

Hi Minnesotakid, you can set flash as the primary booting device by the "boot flash-primary" command.

View solution in original post

Minnesotakid
Level 1
Level 1

@cakwok This indeed fixed it!

I noticed the setting in the show boot command and found the details in this article:
https://www.cisco.com/c/en/us/td/docs/switches/lan/iiot/migration/b-iiot-ios-xe-migration-guide/m-upgrading-from-older-releases-to-ios-xe-17-10-greater.html

Thanks also to @balaji.bandi who set me on the right path. After setting boot flash-primary this was resolved!

View solution in original post

4 Replies 4

cakwok
Cisco Employee
Cisco Employee

Hi Minnesotakid, you can set flash as the primary booting device by the "boot flash-primary" command.

Minnesotakid
Level 1
Level 1

@cakwok This indeed fixed it!

I noticed the setting in the show boot command and found the details in this article:
https://www.cisco.com/c/en/us/td/docs/switches/lan/iiot/migration/b-iiot-ios-xe-migration-guide/m-upgrading-from-older-releases-to-ios-xe-17-10-greater.html

Thanks also to @balaji.bandi who set me on the right path. After setting boot flash-primary this was resolved!

Glad our suggestion made you to resolve the issue, appreciated your input and solution.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help