Technical issue/doubts on 2960X-24PS-L Ethernet Switch
Dear CISCO Team,
We are communicating W5500 ETHERNET IC through CISCO Ethernet Switch 2960X-24PS-L in our IOT device for data transmission. But, Ethernet is not working with different Switch Configuration at all the time. The observations for Ethernet working with different switch configuration is listed in the Document Attached.
Kindly Please go through the document and let us know what could be the problem for which Ethernet working behavior is so with different configuration?
Also, please confirm which switch configuration should I set and What should I need to do/check in my code for proper working?
you posted this query in the industrial networking community. the C2960 is not a product under industrial networking. C2960 is an Enterprise product. you should try posting your query there
I can tell you this: with the information you've provided, they will not be able to help trouble shoot your problem. you're providing your observations, and what is really needed it actual output from the C2960 CLI.
for each trial run you need to provide along with your observations
- show interface <gi1/0/x>
- show power inline <gi1/0/x> (if not using PoE then never mind)
From low data rate wireless, such as low-power-wide area technologies that are designed for small devices running on batteries, to the emergence of high data rate wireless technologies, such as 5G, and Wi-Fi 6, decision makers and network experts ...
This how-to is a step-by-step guide to create and configure an app for IOx on IE3400 which can monitor traffic flowing through the switch.
IOx on IE3400 offers the capability to send a copy of any traffic flowing through the switch to a cust...
This how-to is a step-by-step guide to create a simple docker container which can run on IOx on IE3400.
Unlike Catalyst 9300, which has a x86 (more specifically: x86-64) compatible CPU, IE3400 runs IOx apps on an ARM Cortex-A53 CPU. The...