Why there is no an examination for ccnp upgrading ccie
Nowadays , Cisco company still releases ccie r&s 5.0 after the development of this dacades , but there is no an examination for ccnp upgrading ccie .
There is no doubt that Cisco's Training is the best system in the world , but why dont examiner pulish an examinationversion version , such as ccie r&s 6.0 , it can upgrade to ccie for ccnp , because There is not fair for those person who have ccnp certification . By the way , it is not cheap for us to pass ccnp exam . 200-125 , 300-101 , 300-115 , 300-135 , they cost us $1200 in total at least .
Q. Where can I find the Cisco Kinetic DemoKit Setup Guide?
A. Refer to the "Cisco Kinetic Demo Kit Guide" on Salesconnect (https://salesconnect.cisco.com/#/program/PAGE-10238 then under the "Demo Kit" tab)
Q. Where can I get support for the DemoKi...
Industrial customers are increasingly realizing the importance of digitization to compete and stay relevant in today's business environment. Any digitization efforts involve connecting thousands of sensors and devices to the network, extracting and proces...
This example shows ICPAM integration to VSM 7.12
Principal of operation:
SENSOR_CONNECTOR will connect to ICPAM & register the callback endpoint. Currently SENSOR_CONNECTOR is registering endpoint for all types of events available in ICPAM.
You have confirmed that EFM is running, and you can open a broker connection using port 8080 or 8443 from the EFM server. However, from an external broker, not hosted on the same machine, the connection is refused.
Is this is your fi...
EFM broker connection to upstream EFM server is failing. You have confirmed that the IP connectivity to the destination port number (tcp/443 by default) is open, yet the connection does not establish from the EFM broker to the EFM server.