Internet of Things (IoT)

Collaborate with your peers and Cisco on all areas of IoT to discuss what happens when the internet and networks expand to places such as manufacturing, energy grids, healthcare facilities and transportation.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Activity in Internet of Things (IoT)

Cisco PIX 515E help

Hi, I collect vintage Cisco networking equipment. I have a Cisco PIX 515E.I can't seem to reach the outside internet with it. Here is my config: RDXLFW1# sh ru: Saved:PIX Version 7.2(2)!hostname RDXLFW1enable password 8Ry2YjIyt7RRXU24 encryptednames!...

RadxD461 by Level 1
  • 85 Views
  • 0 replies
  • 0 Helpful votes

ISR4331 IOx VirtualPortGroup issue

HelloTried to configure networking for custom Docker container according to https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2020/pdf/BRKARC-1002.pdf and notes from https://developer.cisco.com/docs/iox/#!isr-4000asr-1000-series-application-devel...

Adding PC to control garage doors

Hello! I'm currently working on lab 6.3.2.3 Packet Tracer - Prototype & Test the Solution. The basic logic is to monitor the current status of garage doors. I wanted to add to Home Wireless Router, expect laptop and pc connected to it, one more pc by...

Gugolsan by Level 1
  • 73 Views
  • 0 replies
  • 0 Helpful votes

IE 3300 industrial grade switches

Hi  one of our customers has IE3300-8P2S-E switches in their environmnet, recently they are in need of few more switches. i was not able to add the same in BoQ. i was suggested to "IE-3400-8P2S-E++" as a replacement available with no specific reason ...

IR1101 P-LPWA-900 Module Deployment

Hello,I'm trying to deploy a P-LPWA-900 LoRaWAN gateway module on an IR1011.  To connect it to AWS, two certs need to be installed.On an IXM, there is a cert install command to be able to do this.  Is there an equivalent command to be able to do this...

Resolved! IR1101 support for Guestshell and Python

I am unable to activate Guestshell on the IR1101 running 16.12.3 as the router complains about missing a tar file. Is this supported? Do I have to download the tar file separately?Thanks! RogueTwo-RA1#sh run | i iox iox RogueTwo-RA1#guestshell enable...

VTP over PRP Channel

IE4000 (or Stratix 5400) user question:  Has anyone successfully made VTP version 3 (or v2) work over a PRP interface?   Debug sw-vlan * seems to show the VTP library transmitting VTP on the PR1 meta-interface instead of the underlying physical inter...

IE 2000 TO EI3100 IOS TO IOS XE

I nee to convert the following code from ios to ios xe:!ptp mode boundarymls qos map policed-dscp 24 27 31 43 46 47 55 59 to 0mls qos map dscp-cos 9 11 12 13 14 15 to 0mls qos map dscp-cos 25 26 28 29 30 to 2mls qos map dscp-cos 40 41 42 44 45 49 50 ...

ndongo by Level 1
  • 245 Views
  • 2 replies
  • 0 Helpful votes

IR1101 cellular WANMon help

I have an IR1101 with Verizon SIM. I have less experience with Cisco cellular, and all experience using Digi, Cradlepoint, and Sierra. With the Digis we use a heartbeat process that pings 1 of 2 IPs, and when both fail it will restart the interface, ...

Cisco IXM-LPWA-800 and PoE

Hi all. We have had about 37 Cisco IXM-LPWA-800-16-K9 operational for some 2 years now. They have been installed at different locations and powered by Cisco PoE switches. We are running LRR with Actility software. Intermittently, any LoraWAN GW may l...

Resolved! IE3200 boot troubles

I seem to be running into issues with the configuration register working properly on the IE-3200-8P2S switches. I often use a USB stick to transfer images to the switch for staging, but if I leave the USB stick connected during boot, the switch will ...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Top Experts - Last 30 Days