hi,
i am trying to run the IPS on my 5515-x and cannot connect to it via http. I have never done this before and am quite lost. Would someone be able to guide me through the process?
here are the responses i get when on the session terminal for IPS
Thanks in advance
Prash
cisco# show version
Application Partition:
Cisco Intrusion Prevention System, Version 7.1(4)E4
Host:
Realm Keys key1.0
Signature Definition:
Signature Update S615.0 2012-01-03
OS Version: 2.6.29.1
Platform: ASA5515-IPS
Serial Number: FCH17317NN3
No license present
Sensor up-time is 30 min.
Using 1343M out of 2996M bytes of available memory (44% usage)
system is using 26.2M out of 160.0M bytes of available disk space (16% usage)
application-data is using 72.7M out of 177.5M bytes of available disk space (43% usage)
boot is using 57.3M out of 77.1M bytes of available disk space (78% usage)
application-log is using 19.3M out of 513.0M bytes of available disk space (4% usage)
MainApp S-2012_FEB_24_00_30_7_1_3_6 (Release) 2012-02-24T00:33:09-0600 Running
AnalysisEngine S-2012_FEB_24_00_30_7_1_3_6 (Release) 2012-02-24T00:33:09-0600 Running
CollaborationApp S-2012_FEB_24_00_30_7_1_3_6 (Release) 2012-02-24T00:33:09-0600 Running
CLI S-2012_FEB_24_00_30_7_1_3_6 (Release) 2012-02-24T00:33:09-0600
Upgrade History:
IPS-K9-7.1-4-E4 02:29:07 UTC Wed Feb 29 2012
Recovery Partition Version 1.1 - 7.1(4)E4
Host Certificate Valid from: 26-Feb-2019 to 26-Feb-2021