06-08-2013 08:42 PM - edited 03-10-2019 05:58 AM
hi all,
i plan to install an AIP-SSC-5 card on my 5505 and would like to know if there's any other hardware, software or RAM required?
i've found that 5505 just needs to run IOS 8.2 with url below:
ciscoasa> show version
Cisco Adaptive Security Appliance Software Version 9.0(1)
Device Manager Version 7.0(1)
Compiled on Fri 26-Oct-12 16:36 by builders
System image file is "disk0:/asa901-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 4 mins 56 secs
Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz,
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Solved! Go to Solution.
06-09-2013 10:10 PM
You've got everything you need to run that module.
06-09-2013 10:10 PM
You've got everything you need to run that module.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide