cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
162
Views
0
Helpful
0
Replies

AIP SSM Fail to boot after upgrade

Hi ,

We have a pair a ASA with AIP-SSM-10 module, Recently we have upgraded the AIP-SSM-10 software from 7.0(6)E4 to 7.1(6)E4 . After the upgrade  module didnt come up . After waiting for some time  we need to give hw-module module 1 reset command from ASA in order to bring the module up. But this time it has booted with old version ie 7.0(6)E4. Again we have tried to upgrade the softare and getting below error.

IPS1(config)# upgrade ftp://cisco@172.24.202.192/IPS-SSM_10-K9-7.1-6-E4.pkg
Password: ********
Warning: Executing this command will apply a software update to the application partition. The system may be rebooted to complete the upgrade.
Continue with upgrade? []: yes
Error: execUpgradeSoftware : Not enough storage space to download package file .

 

How to upgrade the IPS module from this point ? Any help in this would be highly appreciated.

Thanks