I'm using FMC 4500 with code 18.104.22.168 and have added 2 FTD devices they are running on 9300 (SR-24) and few FP 2100 series devices.
I created a global policy to block the all unwanted traffic to enter the network. When I try to deploy this rule, I can't see all the FTD devices that I have in my list. I'm missing at least 3 devices (2 - FP9300 devices and 1-2100 device). FP9300 are in tranparent mode but FP2100 are in routed mode.
I had similar issue before and it resolved by itself. I'm not sure if this is configuration issue or any other issue.
Please let me know if you have questions to me to help me on this.
Hi All, A customer wants to authenticate Anyconnect VPN users from an ASA using the client installed certificate and then with AD. i.e. Is this a corporate device?Would we recommend authenticating the cert on the ASA then passing the AD check to ISE ...
Hello Team, we are getting alert in FMC stating policy deployment failed, we are running on 6.2.0 version and not sure which version is stable version to re mediate this issue, in one event i have seen restart will resolve this issue but is it perman...
Threat Hunting 101
In the latest Cisco Cybersecurity report, we explore all there is to know about threat hunting and provide a how-to guide for creating a threat hunting team.
Here are some of th...
What Is Cisco Identity Services Engine?
Cisco Identity Services Engine (ISE) is an all-in-one enterprise policy control product that enables comprehensive secure wired, wireless, and Virtual Private Networking (VPN) access.
Cisco ISE offers...
To participate in this event, please use the button to ask your questions
(This event was formerly know as Ask the Expert event)
This topic is a chance to discuss more about the best configuration and troubleshooting pr...