cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
839
Views
0
Helpful
2
Replies
Highlighted
Beginner

Cisco 1941 IOS IPS error

Hi,

I'd currently experimenting with IOS based IPS and want to see if it's relevant for my customer. Im configuring it through Cisco Configuration Professional version 2.6 and using downloaded signature sigv5-SDM-S724.zip and the public key loaded as per all documentation suggests. As I finalise with interfaces and all setup parameters in CCP, as I deliver the config to the router I notice the error-

%IPS-3-SIG_UPDATE_REQUIRED: IOS IPS requires a signature update package to be loaded

Any help would be much appreciated.

2 REPLIES 2
Cisco Employee

Cisco 1941 IOS IPS error

Hi,

Could you please load the Signature again but via CLI either using FTP or TFTP

copy ftp:/// idconf

Note: Please remember to use the `idconf' parameter at the end of the copy command.

Do you see any other issue?

HTH

Luis Silva

"If you need PDI (Planning, Design, Implement) assistance feel free to reach"

http://www.cisco.com/web/partners/tools/pdihd.html

Luis Silva
Cisco Employee

Cisco 1941 IOS IPS error

You can find the lastest signature here:

http://tools.cisco.com/squish/a7A00

HTH

Luis Silva

"If you need PDI (Planning, Design, Implement) assistance feel free to reach"

http://www.cisco.com/web/partners/tools/pdihd.html

Luis Silva