10-09-2014 12:03 AM - edited 03-10-2019 06:15 AM
Hi Community
Hope you can help me.
The automatic Signature Update from Cisco.com worked fine on my IPS modules in the past.
Then i updated to 7.3(2)E4 and now it wont update.
Error Message is: AutoUpdate exception: Unknown HTTP exception
Directory: https://www.cisco.com//cgi-bin/front.x/ida/locator/locator.pl
Any Ideas why this happens?
Cisco Intrusion Prevention System, Version 7.3(2)E4
Host:
Realm Keys key1.0
Signature Definition:
Signature Update S825.0 2014-09-25
Threat Profile Version 8
OS Version: 2.6.29.1
Platform: ASA5525-IPS
Serial Number: FCH18087MNT
Licensed, expires: 16-Apr-2017 UTC
Sensor up-time is 5 days.
Using 2992M out of 3484M bytes of available memory (85% usage)
system is using 32.4M out of 160.0M bytes of available disk space (20% usage)
application-data is using 86.0M out of 385.9M bytes of available disk space (23% usage)
boot is using 63.4M out of 77.1M bytes of available disk space (87% usage)
application-log is using 19.3M out of 513.0M bytes of available disk space (4% usage)
MainApp C-2014_04_14_22_11_7_3_1_48 (Release) 2014-04-14T22:15:32-0500 Running
AnalysisEngine C-2014_04_14_22_11_7_3_1_48 (Release) 2014-04-14T22:15:32-0500 Running
CollaborationApp C-2014_04_14_22_11_7_3_1_48 (Release) 2014-04-14T22:15:32-0500 Running
CLI C-2014_04_14_22_11_7_3_1_48 (Release) 2014-04-14T22:15:32-0500
Upgrade History:
IPS-K9-7.3-2-E4 17:25:07 UTC Wed Jan 15 2014
Recovery Partition Version 1.1 - 7.3(2)E4
Thanks a lot!
10-21-2014 06:27 AM
not ideas so far?
does nobody have the same problem?
11-15-2014 04:23 AM
Hi,
same issue here with the same OS version :(
connection is open between the Cisco servers and our IPS.
We are using a 5585-X SSP40 IPS module.
If we find something I will let you know, but will probably downgrade again.
thanks.
Regards,
J
11-16-2014 11:05 PM
do you use a proxy to access the internet?
it seems that there is a problem with the proxy config!
we used a proxy to access the internet, and it worked over months.
now i access internet without a proxy and it works fine!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: