03-29-2018 04:50 AM - edited 02-21-2020 07:34 AM
Recently I have updated all firewall from 9.6 to 9.8(2)24 and try to update the FMC from v6.1.0.6 to 6.2.0-362. Does anybody can assist me the steps to follow? All the firepower have 6.x Versions.
180327 08:42:58] Readiness check for :Sourcefire_3D_Defense_Center_S3_Upgrade-6.2.0-362
[180327 08:42:58] #####################################
[180327 08:42:58] # UPGRADE READINESS CHECK STARTING
[180327 08:42:58] #####################################
[180327 08:42:58] SKIP 000_start/000_check_update.sh
[180327 08:42:58] BEGIN 000_start/100_start_messages.sh
[180327 08:42:59] SKIP 000_start/100_zz_verify_bundle.sh
[180327 08:42:59] SKIP 000_start/101_run_pruning.pl
[180327 08:42:59] BEGIN 000_start/102_check_sru_install_running.pl
[180327 08:42:59] BEGIN 000_start/105_check_model_number.sh
[180327 08:43:00] SKIP 000_start/106_check_HA_sync.pl
[180327 08:43:00] BEGIN 000_start/106_check_HA_updates.pl
[180327 08:43:00] BEGIN 000_start/107_version_check.sh
[180327 08:43:01] BEGIN 000_start/108_check_sensors_ver.pl
[180327 08:43:02] FAILED 000_start/108_check_sensors_ver.pl
[180327 08:43:02] continuing on next script due to readiness check.
[180327 08:43:02] BEGIN 000_start/109_check_HA_MDC_status.pl
[180327 08:43:03] BEGIN 000_start/110_DB_integrity_check.sh
[180327 08:43:18] BEGIN 000_start/111_FS_integrity_check.sh
[180327 08:43:18] BEGIN 000_start/112_CF_check.sh
[180327 08:43:19] BEGIN 000_start/113_EO_integrity_check.pl
[180327 08:43:59] SKIP 000_start/170_link_log.sh
[180327 08:43:59] BEGIN 000_start/250_check_system_files.sh
[180327 08:43:59] SKIP 000_start/320_remove_backups.sh
[180327 08:43:59] SKIP 000_start/400_run_troubleshoot.sh
[180327 08:43:59] BEGIN 000_start/410_check_disk_space.sh
[180327 08:44:05] BEGIN 200_pre/001_check_reg.pl
[180327 08:44:06] BEGIN 200_pre/002_check_mounts.sh
[180327 08:44:07] BEGIN 200_pre/003_check_health.sh
[180327 08:44:09] BEGIN 200_pre/005_check_manager.pl
[180327 08:44:10] BEGIN 200_pre/006_check_snort.sh
[180327 08:44:12] BEGIN 200_pre/007_check_sru_install.sh
[180327 08:44:20] BEGIN 200_pre/009_check_snort_preproc.sh
[180327 08:44:22] BEGIN 200_pre/011_check_self.sh
[180327 08:44:24] BEGIN 200_pre/015_verify_rpm.sh
[180327 08:44:26] BEGIN 200_pre/100_check_correlation_rules.pl
[180327 08:44:29] SKIP 200_pre/100_check_dashboards.pl
[180327 08:44:29] SKIP 200_pre/100_get_snort_from_dc.pl
[180327 08:44:29] BEGIN 200_pre/100_log_version.sh
[180327 08:44:29] SKIP 200_pre/110_setup_upgrade_ui.sh
[180327 08:44:29] SKIP 200_pre/120_generate_auth_for_upgrade_ui.pl
[180327 08:44:29] SKIP 200_pre/152_save_etc_sf.sh
[180327 08:44:29] SKIP 200_pre/199_before_maintenance_mode.sh
[180327 08:44:30] SKIP 200_pre/200_enable_maintenance_mode.pl
[180327 08:44:30] SKIP 200_pre/201_disable_faild.sh
[180327 08:44:30] SKIP 200_pre/202_disable_syncd.sh
[180327 08:44:30] SKIP 200_pre/400_restrict_rpc.sh
[180327 08:44:30] SKIP 200_pre/470_revert_prep.sh
[180327 08:44:30] SKIP 200_pre/500_stop_system.sh
[180327 08:44:30] SKIP 200_pre/501_recovery.sh
[180327 08:44:30] SKIP 200_pre/501_stop_blackbird_cards.sh
[180327 08:44:30] SKIP 200_pre/600_ftd_onbox_data_export.sh
[180327 08:44:30] SKIP 200_pre/999_enable_sync.sh
[180327 08:44:30] Readiness check completed....
[180327 08:44:30] Attempting to remove upgrade lock
[180327 08:44:30] Success, removed upgrade lock
[180327 08:44:30]
[180327 08:44:30] #######################################################
[180327 08:44:30] # UPGRADE READINESS CHECK COMPLETE status : FAILED! #
[180327 08:44:30] #######################################################
thanks in advance.
Saimun
Solved! Go to Solution.
03-29-2018 05:34 AM
Your log indicates:
FAILED 000_start/108_check_sensors_ver.pl
Are all of the sensors 6.1? FMC 6.2 requires this.
See confirmation in the release notes here:
03-29-2018 05:34 AM
Your log indicates:
FAILED 000_start/108_check_sensors_ver.pl
Are all of the sensors 6.1? FMC 6.2 requires this.
See confirmation in the release notes here:
03-29-2018 06:25 AM
Hello Marvin,
thanks for your quick reply. Now I have seen the issue. Most of the sfr are version 6.0.x. So I am updating those versions to 6.1 first and will see what comes in the end. I have an issue to update already one one sfr from 5.4.1 to 6.0.0.5. So I removed that one at first from the firesight and reimaged it with 6.0.0.5. But it is not succeed. I am going to open another discussion for it.
Thanks again for your assist.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: