cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
6631
Views
5
Helpful
6
Replies
Beginner

Problem to manage IPS from ASDM

Hi Guys, I have one ASA 5520 ver 8.4 with a module AIP-SSM-40, when I finished the configuration, I can do ping from ASA to IPS module, and from IPS module to ASA. I Can ping from IPS module to my PC and so on. the problem is when I try to launch the IDM (IPS Tab) from ASDM,

This error message is seen on the GUI.Error connecting to sensor. Error Loading Sensor error. I have connected the managment interface of IPS to a Switch, the ASA is connected to same Switch and my PC is also connected to this Switch, all in the same vlan.

Can you help me about what may I do to solve it.

Thank You.

Everyone's tags (3)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
Beginner

Problem to manage IPS from ASDM

Highlighted

Re: Problem to manage IPS from ASDM

Hello Hugo,

This is one of the issues we are lately seen on the TAC and yes, it is 100% related to the java version on the PC because of the JAVA SSL Client Hello Format.

Thank for the update

Please mark the question as answered so future users can learn from this ( Some kudos for the answer)

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

View solution in original post

6 REPLIES 6
Highlighted
Beginner

Problem to manage IPS from ASDM

Highlighted
Cisco Employee

Problem to manage IPS from ASDM

Hugo,

If you try to access the IDM from your PC does it works? When I mean IDM is to open a web browser an type the IP address directly on it.. just to bypass the ASDM.

Have you test with diffrent PCs?

Luis Silva

Luis Silva
Highlighted
Beginner

Problem to manage IPS from ASDM

Lauching IDM from my PC using web browser work for me, the problem is when I try to launch the IDM from tab (IPS) located on ASDM, when I click on IPS tab, is show the window to login on IPS, but if I write username and passwod I press enter on this window this error message is seen on the GUI.Error connecting to sensor. Error Loading Sensor error.

Regards.

Highlighted
Cisco Employee

Problem to manage IPS from ASDM

What ASDM  and IPS version are you running?

Luis Silva
Highlighted
Beginner

Problem to manage IPS from ASDM

Hi Guys, today I solved this issue. The problem is concern to JAVA version. ASDM work ok with java ver 7, but IDM not work with this java version. I downgrade mi java version from 7 to 6 and IDM now lauch from ASDM.

Thank you for your help.

Regards.

Highlighted

Re: Problem to manage IPS from ASDM

Hello Hugo,

This is one of the issues we are lately seen on the TAC and yes, it is 100% related to the java version on the PC because of the JAVA SSL Client Hello Format.

Thank for the update

Please mark the question as answered so future users can learn from this ( Some kudos for the answer)

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

View solution in original post

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here