2811 SIP Trunk to BroadWorks - 484 Address Incomplete

[rnnltn]

Hi Guys,

I am trying to setup a SIP Trunking from our PBX Which is Broadworks and to 2811 CME Router.

Broadworks <--> SBC <--> CME

sip-ua are now showing registered.

But, When I do a call to the Pilot number, it shows that the CME router is sending 484 Address Incomplete to my SBC.

Called number is 68776987.

Based on the logs, my SBC is sending the complete number CME router is receiving it.

Attached here is the debug ccsip all message from the router.

[Dennis Mink]

can you add the debug ccsip messages output from the cme router to this post, so we can analyse a failed call. cheers