cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
220
Views
0
Helpful
0
Replies
Beginner

2x 7920s. 1 OK, the other "No AP found"

Anybody that can point me in the right direction would be greatly appreciated.

I have a working CME infrastructure w/Exchange, with 99% of the IP phones being 7960s.

I recently acquired 2x 7920s and have configured them both to work with the wireless access point in the office.

  1 unit works flawlessly.  And I am able to place, receive phone calls, etc.

The other, not so much.  Even after using 100% identical configurations on the device, and cloning a good working copy of the 7920 that is functional, one of the devices says "No AP found" and does not connect to anything.

The WAP in question is a Linksys Wireless N (a/b/g compatable).

I'm not sure why one would work while the other wouldn't using the same settings.  Would you guys happen to have any troubleshooting steps I could take on these?

As always, thanks.

Everyone's tags (3)
CreatePlease to create content