cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
419
Views
0
Helpful
3
Replies
Highlighted
Beginner

3725 and VIC-2FX0

Hello all

I am working on my first VOIP/UC project and I'm running into some trouble out of the gate.

I have a 3725 router and access to two IOS images:

advipservicesk9-mz.124-25d and ipvoice-mz-124.25d

I've installed a NM-HD-2V card into the 3725 but when I install the VIC-2FX0 I'm running into issues.

Show Diag yields:

WIC Slot 1:

FXO Voice daughter card (2 port)

WIC module not supported/disabled in this slot

Hardware revision 1.1           Board revision N0

Serial number     30246568      Part number    800-02495-01

FRU Part Number     VIC-2FXO=

Test history      0x0           RMA number     00-00-00

Connector type    Wan Module

EEPROM format version 1

EEPROM contents (hex):

   0x20: 01 0D 01 01 01 CD 86 A8 50 09 BF 01 00 00 00 00

   0x30: B8 00 00 00 03 05 21 01 FF FF FF FF FF FF FF FF

This occurs with either IOS image. Any tips or thoughts on why this occuring? Thank you in advance for any help.

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Master

3725 and VIC-2FX0

As the router is telling you, that old module is not supported on the NM.

http://www.cisco.com/en/US/products/hw/routers/ps214/products_tech_note09186a00800ae37f.shtml

3 REPLIES 3
Hall of Fame Master

3725 and VIC-2FX0

As the router is telling you, that old module is not supported on the NM.

http://www.cisco.com/en/US/products/hw/routers/ps214/products_tech_note09186a00800ae37f.shtml

Beginner

3725 and VIC-2FX0

Ah, yes, the subtle difference between VIC2-2FXO and VIC-2FXO. I have the wrong hardware =\

Thank you the clarification!

Hall of Fame Master

3725 and VIC-2FX0

Thank you for the nice rating and good luck!

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards