05-20-2011 05:56 AM - edited 03-16-2019 05:03 AM
Hi All,
Does CUCM 7.1.2a support 3925 ISR router as MGCP Voice gateway
Thanks
Nomi
05-20-2011 06:04 AM
Hi,
CUCM 7.1.2 does not have the the option to add 3925 gateway as MGCP.
I am sending you the compatibilty matix.
http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd8057f2e0.pdf
05-20-2011 06:05 AM
Hi,
You can confirm which CUCM is supports the 3900 routers by checking the
following link:
Cisco 1861 and Cisco 2800, 3800, 2900, 3900, and 3900E Series
Integrated Services Router Interoperability with Cisco Unified
Communications Manager
http://tools.cisco.com/squish/a1589
I see that you are running
7.1.2a
If you are looking for MGCP support for the 3900 series routers
the requirements are as follows:
1. If you have a 3925 or 3945 router you will need
CallManager 7.1.3 and IOS 15.0.1M
2. If you have a 3925E or 3945E router then will need
CallManager 7.1.5 and IOS 15.1.1T
That information can be found in Table 4 - Cisco Unified Communications
Routers with Cisco Unified Communications Manager Minimum System
Requirements Using MGCP in the link below:
http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sh
eet0900aecd8057f2e0.pdf
Regards,
Priya K
Please rate, if this helped!
05-20-2011 06:24 AM
Thank you for reply
Nomi
05-20-2011 06:50 AM
Hi
one more Quesion
Can setting up the 3925 as an H323 get around this? Or do the same limitations apply with CUC$ 7.1(2a)?
Thanks
Nomi
05-20-2011 06:51 AM
Hi,
3925 can be used as h.323 with CUCM 7.1.2 as a workaround
05-20-2011 06:52 AM
With H.323 or SIP you can do as you please, have more features, stability, no meaningless restrictions ever.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: