cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1276
Views
0
Helpful
3
Replies

3rd Party SIP - CUCM Express 7.1

twfredericks
Level 1
Level 1

Hi All -

I'm at a loss. I have been working on getting some Biamp VoIP-2 cards registered via SIP to my CUCM Express system for 3 days with no luck. I've looked at alot of the discussions in the forums but I'm hoping maybe someone can identify an error in my config preventing the registration. When I do a debug ccsip messages I get an 401 Unauthorized but I have verified the credentials so many times it has to be something else in my config causing the problem. Attached is a snippet of my config and some debug messages. I appreciate any help ya'll can offer. Thanks in advance!!

Tom

1 Accepted Solution

Accepted Solutions

paolo bevilacqua
Hall of Fame
Hall of Fame

Under global, configure a realm, any.

View solution in original post

3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

Under global, configure a realm, any.

You Sir, are a GENIUS! The card registered immediately after I added "authentication realm biamp" to the global config.

Thanks for the extremely quick response!

Tom

Thanks for the nice rating and good luck!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: