cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
2504
Views
0
Helpful
7
Replies
Highlighted
Beginner

3rd party solution to customize CUCM (v7.x -8.x) CDR

I've heard there are such solutions in market, any suggestions? my client doesn't like to read the CDR that CUCM generates, they want a customized, friendly looking one.

thanks.

4 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
Advisor

Yes, there are quite a few. This is one of those applications where you will want to check out a few vendors and try things out. ISI is a company that I usually consider if a customer doesn't have an incumbent product or the incumbent product doesn't support CUCM. They aren't the only one or the best, I have just used them before and they have been providing call accounting solutions for Cisco products for quite some time.

ISI:  http://www.isi-info.com/solutions/CiscoCallAccounting.htm

HTH.


Regards,

Bill

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

View solution in original post

Highlighted
Engager

You want a call logger. This takes the CDR feed and turns it into, well, whatever you want.

http://www.tigercomms.com/ produce one that understands CUCM very well.

One of the things you need to be aware of, is that different products "understand" CUCM to different levels. Some will just say "A called B". Others (e.g. Tiger) will pull out every last detail from the CUCM data feed.

Call loggers aren't just about billing - they're one of the many tools you need for trouble-shooting.

GTG

Please rate all helpful posts.

View solution in original post

Highlighted

Highlighted

7 REPLIES 7
Highlighted
Advisor

Yes, there are quite a few. This is one of those applications where you will want to check out a few vendors and try things out. ISI is a company that I usually consider if a customer doesn't have an incumbent product or the incumbent product doesn't support CUCM. They aren't the only one or the best, I have just used them before and they have been providing call accounting solutions for Cisco products for quite some time.

ISI:  http://www.isi-info.com/solutions/CiscoCallAccounting.htm

HTH.


Regards,

Bill

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

View solution in original post

Highlighted
Engager

You want a call logger. This takes the CDR feed and turns it into, well, whatever you want.

http://www.tigercomms.com/ produce one that understands CUCM very well.

One of the things you need to be aware of, is that different products "understand" CUCM to different levels. Some will just say "A called B". Others (e.g. Tiger) will pull out every last detail from the CUCM data feed.

Call loggers aren't just about billing - they're one of the many tools you need for trouble-shooting.

GTG

Please rate all helpful posts.

View solution in original post

Highlighted

Highlighted

Highlighted

thanks guys, really appreicate your help!

the local Cisco SE just taught me a way, go to http://developer.cisco.com/web/partner/search, search CDR.

Highlighted
Beginner

Hi everybody,

Is it possible using Crystal Reports??

Thanks.

Eduardo

eduardo.ojeda@unifiednetworks.com.mx

Highlighted
Beginner

Hi,

you chould consider also any call accounting system for that. Some listed above, and here is one more: www.2ring.com/tas

Edit: more of these can be found here -

http://developer.cisco.com/web/partner/search;jsessionid=D0912B67F4FBE9030194425B9779E123.liferay-portal1?text=call+accounting&technologyIds=a0G40000000xlnlEAA&availableTechnologies=a0G40000000xlnlEAA&subTechnologyIds=&technologyProductIds=&technolog...

Jiri

Message was edited by: Jiri Princ

Content for Community-Ad