4000 Series Routers DSP FARM?

[patrick.hurley]

Is there a way to create a DSP farm with a cisco 4000 series router?  

[Manish Gogna]

Hi Patrick,

Please check the following link, it covers the dsp related config on 4000 series

http://www.cisco.com/c/en/us/support/docs/routers/4000-series-integrated-services-routers/118792-config-isr-00.html

Manish

[patrick.hurley]

I guess my question is that because the 4000 series routers only support 1 DSP slot on the motherboard, what is Cisco's strategy for DSP Farms.   Will the 3925E/3945E be used for that? 

[Manish Gogna]

Hi Patrick,

Cisco 4000 Series PVDMs are available in two form factors with four supported densities in each form factor:

●   Motherboard PVDMs (PVDM4) for densities up to 256 channels

●   PVDM enhanced services modules (SM-X-PVDM) for densities up to 3080 channels

The details about their support and capacities is listed in the following link

http://www.cisco.com/c/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/data_sheet_c78-728307.html

So, its just not the motherboard PVDM's that are available on the 4000 series.

Manish