08-26-2014 12:35 AM - edited 03-16-2019 11:53 PM
Hello ,
When I try to access the corporate directory in the CISCO 6941 I get the message "requesting"
after a few seconds the error "connection failed" .
The problem only occurs on the 6941 phones , in the 79xx phones it is working fine .
someone have any ideas ?
08-26-2014 04:24 AM
Hi
Have you checked your URLs in Enterprise Parameters? Check the secure and non-secure ones are valid and pointing to the PUblisher IP address in the URL rather than hostname, unless you are 100% your DNS is working for the phones.
Aaron
08-26-2014 06:48 AM
We fixed the problem..
I've uploaded SCCP69xx.9-2-2-6 firmware .
04-30-2015 02:14 PM
Hi Erick
I have this problem, but the version 9-2-2-6 is not aviable for download from cisco, please How do you find the image?
05-02-2015 06:22 PM
Hello jesus,
Below is the link that points to the 9-2-2-6 firmware.
https://software.cisco.com/download/release.html?mdfid=282622816&flowid=46237&softwareid=282074289&release=9.4%281%29SR1&relind=AVAILABLE&rellifecycle=&reltype=all
Hope this helps,
Please rate helpful answers.
Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: