7925 Web Gui change from Read only to Read Write in CME

[rudyfaber]

Does anyone kn99ow how to change the web security setting in Call Manager Express 8.0 for a 7925 phone from Read Only to Read Write?

Thank you

[dksingh]

Try this...

Configure following under telephony-service (and/or ephone-template) being  used for 7925:

 

service phone webAccess 0
no create cnf
create cnf

then reset the phone and once it comes up try 

https://IP_addr_of_7925/

Default  username / password = admin / Cisco

If we are able to get into the phone's web interface see if it lets u modify those settings.
Params on phone the CME lets u modify/configure:

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/command/reference/cme_s1ht.html#wp1132500
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g/7_0/english/deployment/guide/7925dply.pdf (Page 45)

Hope this helps...
DK