7925g Support cisco 1841 CME router

[shaikh ibrahim]

             Hi ,

                        Is  7925g Support cisco 1841 CME router ... i found type only 7920 and 7921 in the router.

any help will be higly appreciated   

[Leonardo Santana]

What is the CME Version that you are using?

Regards

Leonardo Santana

[shaikh ibrahim]

Hi , How can verify the CME version .. actually i got router and its mentioned there C1861-SRST-C-F/K9

[Leonardo Santana]

With the following command:

sh telephony-service

CONFIG (Version=7.1)

=====================

Version 7.1

Cisco Unified Communications Manager Express

For on-line documentation please see:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html

Regards

Leonardo Santana

Rate this if helps!

[Leonardo Santana]

Other thing take a look on the datasheet of 7925g

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/ps9900/data_sheet_c78-504890.html

Protocol support

• Skinny Client Control Protocol (SCCP) • Cisco Unified Communications Manager Versions 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 and later • Cisco Unified Communications Manager Express Version 4.3 and later • Cisco Unified Survivable Remote Site Telephony (SRST) Version 4.3 and later

Look too at the CME compatibility Matrix according to your version:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_device_support_tables_list.html

Rate this if helps!

Regards

Leonardo Santana

[shaikh ibrahim]

Router#sh telephony-service

CONFIG (Version=4.2(0))

=====================

Version 4.2(0)

Cisco Unified Communications Manager Express

For on-line documentation please see:

www.cisco.com/univercd/cc/td/doc/product/ac

source-address 0.0.0.0 port 2000

max-ephones 12

max-dn 24

max-conferences 4 gain -6

dspfarm units 0

dspfarm transcode sessions 0

conference software

hunt-group report delay 1 hours

hunt-group logout DND

max-redirect 5

cnf-file location: system:

cnf-file option: PER-PHONE-TYPE

network-locale[0] US   (This is the default network locale for this box)

network-locale[1] US

network-locale[2] US

network-locale[3] US

Router#sh telephony-service

CONFIG (Version=4.2(0))

=====================

Version 4.2(0)

Cisco Unified Communications Manager Express

For on-line documentation please see:

www.cisco.com/univercd/cc/td/doc/product/ac source-address 0.0.0.0 port 2000

max-ephones 12

max-dn 24

max-conferences 4 gain -6

dspfarm units 0

dspfarm transcode sessions 0

conference software

hunt-group report delay 1 hours

hunt-group logout DND

max-redirect 5

cnf-file location: system:

cnf-file option: PER-PHONE-TYPE

network-locale[0] US   (This is the default network locale for this box)

network-locale[1] US

network-locale[2] US

network-locale[3] US

[shaikh ibrahim]

Hi , The CME 4.0 .. that  means it no t supported with this version ???  ho we can overcome this issue ??

[Leonardo Santana]

Hello Shaikh

No its not support with your CME Version:

Router#sh telephony-service

CONFIG (Version=4.2(0))

=====================

Version 4.2(0)

Cisco Unified Communications Manager Express

The 7925g is supported since CME Version 4.3 and Later:

Protocol support

• Skinny Client Control Protocol (SCCP) • Cisco Unified Communications Manager Versions 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 and later • Cisco Unified Communications Manager Express Version 4.3 and later • Cisco Unified Survivable Remote Site Telephony (SRST) Version 4.3 and later

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/ps9900/data_sheet_c78-504890.html

Regards

Leonardo Santana

[shaikh ibrahim]

Hi ,

      Can i upgrade CME 4.02 to later ... free of cost ??  thankyou in advance