To perform a factory reset, press the Applications button, and then press **1.
When you perform a factory reset of the conference station, the following information is erased or reset to its default value:
•LSC—Erased
•User configuration settings—Reset to default values
•Network configuration settings—Reset to default values
•Call histories—Erased
•Locale information—Reset to default values
•Conference station application—Erased (conference station recovers by loading the term70.default.loads file or the term71.default.loads file, depending on the conference station model)
Before you perform a factory reset, ensure that the following conditions are met:
•The conference station must be on a DHCP-enabled network.
•A valid TFTP server must be set in DCHP option 150 or option 66 on the DHCP server.
•The term70.default.loads file or the term71.default.loads file and the files specified in that file should be available on the TFTP server that is specified by the DHCP packet.
Suresh
