cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
497
Views
0
Helpful
2
Replies

7940/60 - Remotely configure Speed/Duplex

colan.haisell
Level 1
Level 1

Hello,

I would like to remotely configure the Speed/Duplex of a 7940 or 7960. How are you guys doing this?

Thanks in advance,

Col

1 Accepted Solution

Accepted Solutions

gogasca
Level 10
Level 10

From IP Phone manually, no remote, you do have the option to configure the switch ports to 100 full and the phones should auto negotiate at 100 full if the ports on the switch are at 100 full.

View solution in original post

2 Replies 2

gogasca
Level 10
Level 10

From IP Phone manually, no remote, you do have the option to configure the switch ports to 100 full and the phones should auto negotiate at 100 full if the ports on the switch are at 100 full.

Hello,

Thanks for the quick reply.

I have read a couple of things that pointed towards TELNET (SIP only I think), SSH for SCCP (my test phone responds to SSH but I do not know the default username/password) or can it be done by editing the configuration file that the Phone TFTP's when it starts up. I take your response to mean that none of these are really options.

Thanks again and regards,

Col

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: