cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
919
Views
0
Helpful
7
Replies

7960G IP Phone

bryantsteve
Level 1
Level 1

I have Call Manager 7.1.5  and   7960 phones  which will be set up as a community assets in common areas.  I  need to  restrict use of the phones  to a specifc group of authorized users. Active Directory and 802.1x are not available only local Call Manager  authentication. Need help with any suggestions as to how to secure the phone for authozied users only. Thanks

1 Accepted Solution

Accepted Solutions

With that requirements the only in-built solution would be EM, if this was only external calls FAC/CMC would do.

If you don't want to use EM, then you would need a 3rd party solution.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

7 Replies 7

Chris Deren
Hall of Fame
Hall of Fame

Can you elaborate on what you  want to secured?

Is it for making calls by authorized persons?

Or access to Settings, etc?

Chris

Hi Chris,  making calls by authorized persons is what I'm going for. Thanks

And are you talking about internal calls or external calls??

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

This would be for both internal and external calls

With that requirements the only in-built solution would be EM, if this was only external calls FAC/CMC would do.

If you don't want to use EM, then you would need a 3rd party solution.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Forced authorization codes and extention mobility I'll start working on both of these. Thanks!

For internal blocking you can use Calling Search Spaces/Partitions to build the separation. For external depending if you want this statically you would also use CSS/PT and Route Patterns, or if you want to be able to overwrite the setting use Forced Authorization Codes.

HTH,

Chris