We have a 7961 with a 7914 expansion module attached to it. The phone is PoE and the module is using a standard power brick. The switch we are using is a 3560G with most recent code. When we have the module plugged in the lights come on fine however when we plug the phone into the switch, you hear a click noise and then the power for both go out. About every 30-60 seconds the phone lights will blip once and then go off again, like the switch is providing power for one second then cutting it off. We get an error message on the switch (that I have ran through the error decoder) but I can not seem to get to the meat of the problem.
The phone and module work on any other switch we put it on.
Can anyone help me figure this one out?
Here is the error msg..
May 12 14:19:54: %ILPOWER-5-POWER_GRANTED: Interface Gi0/43: Power granted
May 12 14:19:55: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi0/43: Power Controller reports power Tstart error detected
Hi, My name is JanetMy portal ID is https://nwswdvcas-taw.my.webex.com/meet/janet.dvcasI do want you please to delete both my accounts with Webex (free and Paid)So my organisation can join me on another Webex Account as another Host. I did foll...
Our beginner online classes are designed to help IT Admins plan, deploy, and manage their Webex Control Hub environment. Start off by learning what critical elements are needed to deploy Control Hub or move into Webex features that can be used to better ...
I need to modify the SIP header. When I call to the PSTN, the header SIP show From firstname.lastname@example.org (Gateway - Private IP 172.24.10.6) and i need email@example.com (Gateway - Public IP 188.8.131.52). How can I change in theGateway the ...