cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
386
Views
0
Helpful
1
Replies

7962G TimeZone Errors

CWOParker
Beginner
Beginner

I am running a single site deployment with CUCM ver 8.0(2) Pub/Sub. We have all phones in one Voice VLAN using three LAN switches and VTP to distribute the VLAN across the LAN.  All phones are programmed with the same Device Pool.  There is only one DateTime Group configured (CMLocal) at (GMT+9:00) Asia/Seoul*.  I know the legacy phones require a time zone with the * if the firmware is prior to 9.0.  Our phones are running SCCP43.9-03S.  Our network is not running any NTP servers and all phones have a static IP address.  Due to other issues, the CUCM Cluster has been re-installed and re-built with the same problem arrising:  Some of the phones display the correct time while others are displaying GMT time.

Does anyone know the cause of this and how we can fix the issue?

Thanks,

Jason

1 Reply 1

Anas Abueideh
Engager
Engager

Hi,

it is a firmware bug. You need to upgrade the firmware of the phone.

HTH

Anas

please rate if it is helpful

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: