09-02-2014 04:20 AM - edited 03-16-2019 11:59 PM
Hi,
i'm trying to find information about the phone 8841 and the srst support.
If i check the release notes for the phone firmware, i see that the SRST version required is "SRST 8.0 (IOS load 15.1(1)T) and above" as you can read in the document http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8841_8851_8861/firmware/10-2-1/english/ReleaseNotes/P881_BK_R7A58C22_00_rn-10_2_1-8841-8851-8861/P881_BK_R7A58C22_00_rn-10_2_1-8841-8851-8861_chapter_00.html
If i check the SRST 10.5 datasheet the phone 8841 is not mentioned in the phones supported http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-survivable-remote-site-telephony/data_sheet_c78-678873.html
So is the phone 8841 supported for SRST or not? And if yes, in what SRST version is supported?
thanks and regards,
Christian
Solved! Go to Solution.
09-02-2014 04:39 AM
Hi.
As you have seen in your first link, they are supported from srst Version 8.0 as they are treated as SIP endpoints
HTH
Regards
Carlo
09-02-2014 04:39 AM
Hi.
As you have seen in your first link, they are supported from srst Version 8.0 as they are treated as SIP endpoints
HTH
Regards
Carlo
09-02-2014 04:49 AM
Thanks Carlo,
i'm wondering why Cisco have to confuse people by writing different information for the same matter.
Regards,
Christian
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: