We are in process of migration from CUCM v7 to CUCM v10.5. We have around 3000 SCCP Phone in centralized CUCM v7 also we are migrating the Phones to 8800 seris SIP phones after success ful migration of CUCM. We created an inter cluster trunk between the clusters to make internal calling as SIP trunk is not supported in CUCM v7.
we tested the internal calling between the clusters. it is working fine between SCCP Phones but when we replace the phones in CUCMv10.5 to 8865 phone only incoming calls is working between the cluster. 8865 SIP --> CUCMv10.5 --> ICT --> CUCMv7 --> 7975 SCCP is not working.
Any advice is appreciated. the stage by stage migration plan is stuck because of this issue
This document is intended to receive any new ideas for TAC to create new useful walkthrough videos to help set up deployments, integrations, etc.
Feel free to share any feedback about new walkthrough videos you consider useful, please share your o...
Configuring Cloud Connected PSTN (CCP) – Easy as 1-2-3!
STEP 1: PREPARE
Before you can configure your CCP in Control Hub, you must procure PSTN services from an authorized Webex Calling CCP Partn...
To participate in this event, please use the button to ask your questions
This topic is a chance to discuss more about how to read Cisco Unified Communications trace files. In this session, Cisco D...