cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

442
Views
0
Helpful
9
Replies

8961 Expansion Module and Call Transfers

Hi,

Is there a way to transfer calls using the stored numbers in the expansion module on a 8961?

I touch the TRANSFER hard key and then a stored number on my expansion module but the softkey for TRANSFER doesn't pop up.

I am very new to our cisco system so please bear with me if this doesn't make much sense.

Thank you.              

9 REPLIES 9
Enthusiast

8961 Expansion Module and Call Transfers

What is the CUCM/CME version?

What is the firmware version that the 8961 is using?

--
Jorge Armijo

Please remember to rate helpful responses and identify helpful or correct answers.

-- Jorge Armijo Please remember to rate helpful responses and identify helpful or correct answers.
Rising star

Re: 8961 Expansion Module and Call Transfers

Hi Bret,

Yes, it there a way. Follow this instructions:

1.With a phone call established, press the Transfer hard key.

2. The New Call tab will appear

3. Press a stored number on the expansion module.

I already tested this a minute ago on CUCM 8.5 so it should work. If not, maybe you're hitting some firmware bug.

Please remember to rate useful posts clicking on the stars below.
Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo.
___________________________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie

Re: 8961 Expansion Module and Call Transfers

Tried that and no luck.

We have only had this system for 3 weeks so I am a newbie.

Rising star

Re: 8961 Expansion Module and Call Transfers

Are you running CUCM or CME?

Please remember to rate useful posts clicking on the stars below.
Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo.
___________________________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie

Re: 8961 Expansion Module and Call Transfers

CUCM 9.1.1

Rising star

Re: 8961 Expansion Module and Call Transfers

It should work too. Have you try upgrading the phone firmware?

Please remember to rate useful posts clicking on the stars below.
Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo.
___________________________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie
Advocate

Re: 8961 Expansion Module and Call Transfers

You are probably hitting the bug: CSCud07738. The fix is to downgrade to 9.3.1.33.

Good luck!

Please rate useful posts.
Rising star

Re: 8961 Expansion Module and Call Transfers

That bug is currently under review for publishing on Bug Toolkit. You will have to wait for a altenative walkaround.

Please remember to rate useful posts clicking on the stars below.
Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo.
___________________________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie
Highlighted
Contributor

Re: 8961 Expansion Module and Call Transfers

I had the same issue with my 8961 and KEM module running on 9.1.2 with the phone load sip8961.9-3-2-10

. I upgraded the phone load to the latest code, sip8961.9-4-1-9, and the problem is fixed.

HTH

   Jon


CreatePlease to create content
Content for Community-Ad
FusionCharts will render here