cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
859
Views
0
Helpful
2
Replies

9011T fast busy?

jblalock1337
Level 1
Level 1

Hello all,

This is driving me nuts! System is a 3825, 12.4(9)T1, CME 4.0. My innternational dial-peer is as follows:

dial-peer voice 9011 pots

description International dialing

destination-pattern 9011T

port 0/0/0:1

prefix 011

As soon as I hit the "0" in "90" it gives me a fast busy. If I change the destination pattern to 011T and remove the prefix, it works just fine. Here is a 'debug voip dialpeer' output when the pattern in 9011T:

Nov 21 17:17:26.738: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Calling Number=2306, Called Number=, Voice-Interface=0x68AC5E78,

Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,

Peer Info Type=DIALPEER_INFO_SPEECH

Nov 21 17:17:26.738: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=20004

Nov 21 17:17:27.418: //-1/FE8BC628BB6F/DPM/dpMatchPeersCore:

Calling Number=, Called Number=9, Peer Info Type=DIALPEER_INFO_SPEECH

Nov 21 17:17:27.418: //-1/FE8BC628BB6F/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=9

IRVCME01#

Nov 21 17:17:27.418: //-1/FE8BC628BB6F/DPM/dpMatchPeersCore:

Result=Partial Matches(1) after DP_MATCH_DEST

Nov 21 17:17:27.418: //-1/FE8BC628BB6F/DPM/dpMatchPeersMoreArg:

Result=MORE_DIGITS_NEEDED(1)

Here are my dial-peers:

dial-peer voice 10 voip

description Voicemail Pilot Number

destination-pattern 2399

session target ipv4:172.29.22.230

codec g711ulaw

no vad

!

dial-peer voice 1000 pots

incoming called-number .

port 0/0/0:1

!

dial-peer voice 911 pots

corlist outgoing 911

description Emergency 911

destination-pattern 911

port 0/0/0:1

forward-digits all

!

dial-peer voice 9911 pots

corlist outgoing 911

description Emergency 911

destination-pattern 9911

port 0/0/0:1

forward-digits 3

!

dial-peer voice 1800 pots

corlist outgoing 18XX

description 1800-XXX-XXXX

destination-pattern 91800.......

port 0/0/0:1

forward-digits 11

!

dial-peer voice 1855 pots

corlist outgoing 18XX

description 1855-XXX-XXXX

destination-pattern 91855.......

port 0/0/0:1

forward-digits 11

!

dial-peer voice 1866 pots

corlist outgoing 18XX

description 1866-XXX-XXXX

destination-pattern 91866.......

port 0/0/0:1

forward-digits 11

!

dial-peer voice 1877 pots

corlist outgoing 18XX

description 1877-XXX-XXXX

destination-pattern 91877.......

port 0/0/0:1

forward-digits 11

!

dial-peer voice 1888 pots

corlist outgoing 18XX

description 1888-XXX-XXXX

destination-pattern 91888.......

port 0/0/0:1

forward-digits 11

!

dial-peer voice 97 pots

corlist outgoing local-call

description 7-digit dialing

destination-pattern 9[2-9]......

port 0/0/0:1

forward-digits 7

!

dial-peer voice 910 pots

corlist outgoing local-call

description 10-digit dialing

destination-pattern 9[2-9]..[2-9]......

port 0/0/0:1

forward-digits 10

!

dial-peer voice 9411 pots

corlist outgoing services

description 411 Information

destination-pattern 9411

port 0/0/0:1

forward-digits 3

!

dial-peer voice 9555 pots

corlist outgoing services

description 555-1212 Information

destination-pattern 95551212

port 0/0/0:1

forward-digits 7

!

dial-peer voice 9110 pots

corlist outgoing ld-call

description Long Distance dialing

destination-pattern 91[2-9].........

port 0/0/0:1

forward-digits 11

!

dial-peer voice 39 pots

description Overhead Paging

destination-pattern 7777

port 0/3/0

!

dial-peer voice 390 pots

description ANALOG TEST PHONE

destination-pattern 2541

port 0/1/1

!

dial-peer voice 20 voip

destination-pattern 2398

session target ipv4:172.29.22.230

!

dial-peer voice 9011 pots

description International dialing

destination-pattern 9011T

port 0/0/0:1

prefix 011

Any help would be appreciated...I'm hoping it's not anything glaringly obvious =(

2 Replies 2

jolo07310
Level 5
Level 5

It is werid, it should work.

Is anything to do the corlist?? I saw you have corlist at Local, LD, but not at International dial-peer.

Ken

I don't think it's anything to do with a corlist since it works if I change my dest pattern to 011T. I do indeed have a corlist, however i removed it from this dial-peer for troubleshooting purposes.

I'm stumped =X

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: